Renntechnik Motorsport 718 4.0 OPF Delete Pipes
Renntechnik Motorsport are proud to present our 718 4.0 GT4/GTS/Spyder OPF Delete Pipes (Over Axle Pipes - OAPs).
The OEM exhaust system of the 718 GT4/GTS 4.0 and Spyder is a major downfall of an otherwise phenomenal car. OPF filters (designed to reduce emissions) are extremely restrictive and hold back both power and torque. They also hide the higher pitched flat 6 symphony these cars should have always had.
Due to the close proximity to the rear tyres, Renntechnik Motorsport OPF Delete Pipes come with heat shielding as standard which helps to reduce rear tyre temperatures further than the stock OPFs.
We've meticulously engineered our OPF Delete Pipes in order to release approximately 20bhp and 16lb torque whilst making a 50% weight saving. There is no need to carry out a tune following installation.
Having tested these for thousands of miles on the road and several UK tracks and Nürburgring Nordschleife, we're confident you'll be very happy with the improved sound and throttle response, no matter how the car shall be used. When fitted to our 718 GT4, the car has still been tested under UK dB track limits.
Renntechnik Motorsport OPF Delets Pipes are compatible with both the OEM headers and the OEM rear muffler, resulting in the quickest and most cost effective way of releasing additional power and noise. Install time should be around one hour.
When coupled with Renntechnik Motorsport Valved Rear Section, you will fully unleash that GT3-esque high pitched sound.
These are compatible with the cars below:
- Porsche 718 Cayman GT4 4.0
- Porsche 718 Cayman GTS 4.0
- Porsche 718 Boxster GTS 4.0
- Porsche 718 Boxster Spyder 4.0
EU cars may show an EML light which can be coded out or blocked with an OBD blocker.
Due to removing the OPF, the fitting of Renntechnik Motorsport OPF Delete Pipes does not comply with UK regulations and as such are designed for circuit use only.
Please note that whilst we try to keep stock of all Renntechnik Motorsport exhaust components, always allow 4-6 weeks from point of order.